TileOS/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch
Sunderland93 ac8f99ffa3 Initial upload
2024-02-16 01:05:14 +04:00

465 lines
15 KiB
Diff
Raw Blame History

From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 14 Sep 2023 20:43:23 +0206
Subject: [PATCH 006/134] serial: 8250: Use port lock wrappers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-7-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/8250/8250_core.c | 12 ++--
drivers/tty/serial/8250/8250_port.c | 100 ++++++++++++++++++------------------
2 files changed, 56 insertions(+), 56 deletions(-)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -259,7 +259,7 @@ static void serial8250_backup_timeout(st
unsigned int iir, ier = 0, lsr;
unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
+ uart_port_lock_irqsave(&up->port, &flags);
/*
* Must disable interrupts or else we risk racing with the interrupt
@@ -292,7 +292,7 @@ static void serial8250_backup_timeout(st
if (up->port.irq)
serial_out(up, UART_IER, ier);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ uart_port_unlock_irqrestore(&up->port, flags);
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
@@ -992,11 +992,11 @@ static void serial_8250_overrun_backoff_
struct uart_port *port = &up->port;
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
up->ier |= UART_IER_RLSI | UART_IER_RDI;
up->port.read_status_mask |= UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
/**
@@ -1194,9 +1194,9 @@ void serial8250_unregister_port(int line
if (uart->em485) {
unsigned long flags;
- spin_lock_irqsave(&uart->port.lock, flags);
+ uart_port_lock_irqsave(&uart->port, &flags);
serial8250_em485_destroy(uart);
- spin_unlock_irqrestore(&uart->port.lock, flags);
+ uart_port_unlock_irqrestore(&uart->port, flags);
}
uart_remove_one_port(&serial8250_reg, &uart->port);
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -689,7 +689,7 @@ static void serial8250_set_sleep(struct
if (p->capabilities & UART_CAP_SLEEP) {
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&p->port.lock);
+ uart_port_lock_irq(&p->port);
if (p->capabilities & UART_CAP_EFR) {
lcr = serial_in(p, UART_LCR);
efr = serial_in(p, UART_EFR);
@@ -703,7 +703,7 @@ static void serial8250_set_sleep(struct
serial_out(p, UART_EFR, efr);
serial_out(p, UART_LCR, lcr);
}
- spin_unlock_irq(&p->port.lock);
+ uart_port_unlock_irq(&p->port);
}
serial8250_rpm_put(p);
@@ -746,9 +746,9 @@ static void enable_rsa(struct uart_8250_
{
if (up->port.type == PORT_RSA) {
if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
+ uart_port_lock_irq(&up->port);
__enable_rsa(up);
- spin_unlock_irq(&up->port.lock);
+ uart_port_unlock_irq(&up->port);
}
if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
serial_out(up, UART_RSA_FRR, 0);
@@ -768,7 +768,7 @@ static void disable_rsa(struct uart_8250
if (up->port.type == PORT_RSA &&
up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
+ uart_port_lock_irq(&up->port);
mode = serial_in(up, UART_RSA_MSR);
result = !(mode & UART_RSA_MSR_FIFO);
@@ -781,7 +781,7 @@ static void disable_rsa(struct uart_8250
if (result)
up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
- spin_unlock_irq(&up->port.lock);
+ uart_port_unlock_irq(&up->port);
}
}
#endif /* CONFIG_SERIAL_8250_RSA */
@@ -1172,7 +1172,7 @@ static void autoconfig(struct uart_8250_
*
* Synchronize UART_IER access against the console.
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
up->capabilities = 0;
up->bugs = 0;
@@ -1211,7 +1211,7 @@ static void autoconfig(struct uart_8250_
/*
* We failed; there's nothing here
*/
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
scratch2, scratch3);
goto out;
@@ -1235,7 +1235,7 @@ static void autoconfig(struct uart_8250_
status1 = serial_in(up, UART_MSR) & UART_MSR_STATUS_BITS;
serial8250_out_MCR(up, save_mcr);
if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) {
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
DEBUG_AUTOCONF("LOOP test failed (%02x) ",
status1);
goto out;
@@ -1304,7 +1304,7 @@ static void autoconfig(struct uart_8250_
serial8250_clear_IER(up);
out_unlock:
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
/*
* Check if the device is a Fintek F81216A
@@ -1344,9 +1344,9 @@ static void autoconfig_irq(struct uart_8
probe_irq_off(probe_irq_on());
save_mcr = serial8250_in_MCR(up);
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
save_ier = serial_in(up, UART_IER);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2);
irqs = probe_irq_on();
@@ -1359,9 +1359,9 @@ static void autoconfig_irq(struct uart_8
UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
}
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
serial_out(up, UART_IER, UART_IER_ALL_INTR);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
serial_in(up, UART_LSR);
serial_in(up, UART_RX);
serial_in(up, UART_IIR);
@@ -1372,9 +1372,9 @@ static void autoconfig_irq(struct uart_8
serial8250_out_MCR(up, save_mcr);
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
serial_out(up, UART_IER, save_ier);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
if (port->flags & UPF_FOURPORT)
outb_p(save_ICP, ICP);
@@ -1442,13 +1442,13 @@ static enum hrtimer_restart serial8250_e
unsigned long flags;
serial8250_rpm_get(p);
- spin_lock_irqsave(&p->port.lock, flags);
+ uart_port_lock_irqsave(&p->port, &flags);
if (em485->active_timer == &em485->stop_tx_timer) {
p->rs485_stop_tx(p);
em485->active_timer = NULL;
em485->tx_stopped = true;
}
- spin_unlock_irqrestore(&p->port.lock, flags);
+ uart_port_unlock_irqrestore(&p->port, flags);
serial8250_rpm_put(p);
return HRTIMER_NORESTART;
@@ -1630,12 +1630,12 @@ static enum hrtimer_restart serial8250_e
struct uart_8250_port *p = em485->port;
unsigned long flags;
- spin_lock_irqsave(&p->port.lock, flags);
+ uart_port_lock_irqsave(&p->port, &flags);
if (em485->active_timer == &em485->start_tx_timer) {
__start_tx(&p->port);
em485->active_timer = NULL;
}
- spin_unlock_irqrestore(&p->port.lock, flags);
+ uart_port_unlock_irqrestore(&p->port, flags);
return HRTIMER_NORESTART;
}
@@ -1918,7 +1918,7 @@ int serial8250_handle_irq(struct uart_po
if (iir & UART_IIR_NO_INT)
return 0;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
status = serial_lsr_in(up);
@@ -1988,9 +1988,9 @@ static int serial8250_tx_threshold_handl
if ((iir & UART_IIR_ID) == UART_IIR_THRI) {
struct uart_8250_port *up = up_to_u8250p(port);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
serial8250_tx_chars(up);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
iir = serial_port_in(port, UART_IIR);
@@ -2005,10 +2005,10 @@ static unsigned int serial8250_tx_empty(
serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
if (!serial8250_tx_dma_running(up) && uart_lsr_tx_empty(serial_lsr_in(up)))
result = TIOCSER_TEMT;
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
serial8250_rpm_put(up);
@@ -2070,13 +2070,13 @@ static void serial8250_break_ctl(struct
unsigned long flags;
serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
else
up->lcr &= ~UART_LCR_SBC;
serial_port_out(port, UART_LCR, up->lcr);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
serial8250_rpm_put(up);
}
@@ -2211,7 +2211,7 @@ int serial8250_do_startup(struct uart_po
*
* Synchronize UART_IER access against the console.
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
up->acr = 0;
serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
serial_port_out(port, UART_EFR, UART_EFR_ECB);
@@ -2221,7 +2221,7 @@ int serial8250_do_startup(struct uart_po
serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
serial_port_out(port, UART_EFR, UART_EFR_ECB);
serial_port_out(port, UART_LCR, 0);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
if (port->type == PORT_DA830) {
@@ -2230,10 +2230,10 @@ int serial8250_do_startup(struct uart_po
*
* Synchronize UART_IER access against the console.
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
serial_port_out(port, UART_IER, 0);
serial_port_out(port, UART_DA830_PWREMU_MGMT, 0);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
mdelay(10);
/* Enable Tx, Rx and free run mode */
@@ -2347,7 +2347,7 @@ int serial8250_do_startup(struct uart_po
*
* Synchronize UART_IER access against the console.
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2359,7 +2359,7 @@ int serial8250_do_startup(struct uart_po
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (port->irqflags & IRQF_SHARED)
enable_irq(port->irq);
@@ -2382,7 +2382,7 @@ int serial8250_do_startup(struct uart_po
*/
serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
if (up->port.flags & UPF_FOURPORT) {
if (!up->port.irq)
up->port.mctrl |= TIOCM_OUT1;
@@ -2428,7 +2428,7 @@ int serial8250_do_startup(struct uart_po
}
dont_test_tx_en:
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
/*
* Clear the interrupt registers again for luck, and clear the
@@ -2499,17 +2499,17 @@ void serial8250_do_shutdown(struct uart_
*
* Synchronize UART_IER access against the console.
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
up->ier = 0;
serial_port_out(port, UART_IER, 0);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
synchronize_irq(port->irq);
if (up->dma)
serial8250_release_dma(up);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
if (port->flags & UPF_FOURPORT) {
/* reset interrupts on the AST Fourport board */
inb((port->iobase & 0xfe0) | 0x1f);
@@ -2518,7 +2518,7 @@ void serial8250_do_shutdown(struct uart_
port->mctrl &= ~TIOCM_OUT2;
serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
/*
* Disable break condition and FIFOs
@@ -2754,14 +2754,14 @@ void serial8250_update_uartclk(struct ua
quot = serial8250_get_divisor(port, baud, &frac);
serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
uart_update_timeout(port, termios->c_cflag, baud);
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
serial8250_rpm_put(up);
out_unlock:
@@ -2798,7 +2798,7 @@ serial8250_do_set_termios(struct uart_po
* Synchronize UART_IER access against the console.
*/
serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
up->lcr = cval; /* Save computed LCR */
@@ -2901,7 +2901,7 @@ serial8250_do_set_termios(struct uart_po
serial_port_out(port, UART_FCR, up->fcr); /* set fcr */
}
serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
serial8250_rpm_put(up);
/* Don't rewrite B0 */
@@ -2924,15 +2924,15 @@ void serial8250_do_set_ldisc(struct uart
{
if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
serial8250_enable_ms(port);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
} else {
port->flags &= ~UPF_HARDPPS_CD;
if (!UART_ENABLE_MS(port, termios->c_cflag)) {
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
serial8250_disable_ms(port);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
}
}
}
@@ -3406,9 +3406,9 @@ void serial8250_console_write(struct uar
touch_nmi_watchdog();
if (oops_in_progress)
- locked = spin_trylock_irqsave(&port->lock, flags);
+ locked = uart_port_trylock_irqsave(port, &flags);
else
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
/*
* First save the IER then disable the interrupts
@@ -3478,7 +3478,7 @@ void serial8250_console_write(struct uar
serial8250_modem_status(up);
if (locked)
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static unsigned int probe_baud(struct uart_port *port)
Reference in a new issue View git blame Copy permalink