113 lines
4 KiB
Diff
113 lines
4 KiB
Diff
From: Thomas Gleixner <tglx@linutronix.de>
|
|
Date: Thu, 14 Sep 2023 20:43:41 +0206
|
|
Subject: [PATCH 024/134] serial: digicolor: Use port lock wrappers
|
|
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
|
|
|
|
When a serial port is used for kernel console output, then all
|
|
modifications to the UART registers which are done from other contexts,
|
|
e.g. getty, termios, are interference points for the kernel console.
|
|
|
|
So far this has been ignored and the printk output is based on the
|
|
principle of hope. The rework of the console infrastructure which aims to
|
|
support threaded and atomic consoles, requires to mark sections which
|
|
modify the UART registers as unsafe. This allows the atomic write function
|
|
to make informed decisions and eventually to restore operational state. It
|
|
also allows to prevent the regular UART code from modifying UART registers
|
|
while printk output is in progress.
|
|
|
|
All modifications of UART registers are guarded by the UART port lock,
|
|
which provides an obvious synchronization point with the console
|
|
infrastructure.
|
|
|
|
To avoid adding this functionality to all UART drivers, wrap the
|
|
spin_[un]lock*() invocations for uart_port::lock into helper functions
|
|
which just contain the spin_[un]lock*() invocations for now. In a
|
|
subsequent step these helpers will gain the console synchronization
|
|
mechanisms.
|
|
|
|
Converted with coccinelle. No functional change.
|
|
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Acked-by: Baruch Siach <baruch@tkos.co.il>
|
|
Signed-off-by: John Ogness <john.ogness@linutronix.de>
|
|
Link: https://lore.kernel.org/r/20230914183831.587273-25-john.ogness@linutronix.de
|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
---
|
|
drivers/tty/serial/digicolor-usart.c | 18 +++++++++---------
|
|
1 file changed, 9 insertions(+), 9 deletions(-)
|
|
|
|
--- a/drivers/tty/serial/digicolor-usart.c
|
|
+++ b/drivers/tty/serial/digicolor-usart.c
|
|
@@ -133,7 +133,7 @@ static void digicolor_uart_rx(struct uar
|
|
{
|
|
unsigned long flags;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
while (1) {
|
|
u8 status, ch, ch_flag;
|
|
@@ -172,7 +172,7 @@ static void digicolor_uart_rx(struct uar
|
|
ch_flag);
|
|
}
|
|
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
tty_flip_buffer_push(&port->state->port);
|
|
}
|
|
@@ -185,7 +185,7 @@ static void digicolor_uart_tx(struct uar
|
|
if (digicolor_uart_tx_full(port))
|
|
return;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
if (port->x_char) {
|
|
writeb_relaxed(port->x_char, port->membase + UA_EMI_REC);
|
|
@@ -211,7 +211,7 @@ static void digicolor_uart_tx(struct uar
|
|
uart_write_wakeup(port);
|
|
|
|
out:
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
}
|
|
|
|
static irqreturn_t digicolor_uart_int(int irq, void *dev_id)
|
|
@@ -333,7 +333,7 @@ static void digicolor_uart_set_termios(s
|
|
port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR
|
|
| UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
@@ -341,7 +341,7 @@ static void digicolor_uart_set_termios(s
|
|
writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO);
|
|
writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI);
|
|
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
}
|
|
|
|
static const char *digicolor_uart_type(struct uart_port *port)
|
|
@@ -398,14 +398,14 @@ static void digicolor_uart_console_write
|
|
int locked = 1;
|
|
|
|
if (oops_in_progress)
|
|
- locked = spin_trylock_irqsave(&port->lock, flags);
|
|
+ locked = uart_port_trylock_irqsave(port, &flags);
|
|
else
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
uart_console_write(port, c, n, digicolor_uart_console_putchar);
|
|
|
|
if (locked)
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
/* Wait for transmitter to become empty */
|
|
do {
|