TileOS/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux/debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch
Sunderland93 ac8f99ffa3 Initial upload
2024-02-16 01:05:14 +04:00

327 lines
11 KiB
Diff
Raw Blame History

From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 14 Sep 2023 20:43:34 +0206
Subject: [PATCH 017/134] serial: amba-pl011: Use port lock wrappers
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-18-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/amba-pl011.c | 72 ++++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 36 deletions(-)
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -347,9 +347,9 @@ static int pl011_fifo_to_tty(struct uart
flag = TTY_FRAME;
}
- spin_unlock(&uap->port.lock);
+ uart_port_unlock(&uap->port);
sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
- spin_lock(&uap->port.lock);
+ uart_port_lock(&uap->port);
if (!sysrq)
uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
@@ -544,7 +544,7 @@ static void pl011_dma_tx_callback(void *
unsigned long flags;
u16 dmacr;
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
if (uap->dmatx.queued)
dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
dmatx->len, DMA_TO_DEVICE);
@@ -565,7 +565,7 @@ static void pl011_dma_tx_callback(void *
if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) ||
uart_circ_empty(&uap->port.state->xmit)) {
uap->dmatx.queued = false;
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
return;
}
@@ -576,7 +576,7 @@ static void pl011_dma_tx_callback(void *
*/
pl011_start_tx_pio(uap);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
}
/*
@@ -1004,7 +1004,7 @@ static void pl011_dma_rx_callback(void *
* routine to flush out the secondary DMA buffer while
* we immediately trigger the next DMA job.
*/
- spin_lock_irq(&uap->port.lock);
+ uart_port_lock_irq(&uap->port);
/*
* Rx data can be taken by the UART interrupts during
* the DMA irq handler. So we check the residue here.
@@ -1020,7 +1020,7 @@ static void pl011_dma_rx_callback(void *
ret = pl011_dma_rx_trigger_dma(uap);
pl011_dma_rx_chars(uap, pending, lastbuf, false);
- spin_unlock_irq(&uap->port.lock);
+ uart_port_unlock_irq(&uap->port);
/*
* Do this check after we picked the DMA chars so we don't
* get some IRQ immediately from RX.
@@ -1086,11 +1086,11 @@ static void pl011_dma_rx_poll(struct tim
if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
> uap->dmarx.poll_timeout) {
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM;
pl011_write(uap->im, uap, REG_IMSC);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
uap->dmarx.running = false;
dmaengine_terminate_all(rxchan);
@@ -1186,10 +1186,10 @@ static void pl011_dma_shutdown(struct ua
while (pl011_read(uap, REG_FR) & uap->vendor->fr_busy)
cpu_relax();
- spin_lock_irq(&uap->port.lock);
+ uart_port_lock_irq(&uap->port);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
pl011_write(uap->dmacr, uap, REG_DMACR);
- spin_unlock_irq(&uap->port.lock);
+ uart_port_unlock_irq(&uap->port);
if (uap->using_tx_dma) {
/* In theory, this should already be done by pl011_dma_flush_buffer */
@@ -1370,9 +1370,9 @@ static void pl011_throttle_rx(struct uar
{
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
pl011_stop_rx(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void pl011_enable_ms(struct uart_port *port)
@@ -1390,7 +1390,7 @@ static void pl011_rx_chars(struct uart_a
{
pl011_fifo_to_tty(uap);
- spin_unlock(&uap->port.lock);
+ uart_port_unlock(&uap->port);
tty_flip_buffer_push(&uap->port.state->port);
/*
* If we were temporarily out of DMA mode for a while,
@@ -1415,7 +1415,7 @@ static void pl011_rx_chars(struct uart_a
#endif
}
}
- spin_lock(&uap->port.lock);
+ uart_port_lock(&uap->port);
}
static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
@@ -1551,7 +1551,7 @@ static irqreturn_t pl011_int(int irq, vo
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
int handled = 0;
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
status = pl011_read(uap, REG_RIS) & uap->im;
if (status) {
do {
@@ -1581,7 +1581,7 @@ static irqreturn_t pl011_int(int irq, vo
handled = 1;
}
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
return IRQ_RETVAL(handled);
}
@@ -1653,14 +1653,14 @@ static void pl011_break_ctl(struct uart_
unsigned long flags;
unsigned int lcr_h;
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
lcr_h = pl011_read(uap, REG_LCRH_TX);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
pl011_write(lcr_h, uap, REG_LCRH_TX);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
}
#ifdef CONFIG_CONSOLE_POLL
@@ -1799,7 +1799,7 @@ static void pl011_enable_interrupts(stru
unsigned long flags;
unsigned int i;
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
/* Clear out any spuriously appearing RX interrupts */
pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1821,7 +1821,7 @@ static void pl011_enable_interrupts(stru
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
pl011_write(uap->im, uap, REG_IMSC);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
}
static void pl011_unthrottle_rx(struct uart_port *port)
@@ -1829,7 +1829,7 @@ static void pl011_unthrottle_rx(struct u
struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
unsigned long flags;
- spin_lock_irqsave(&uap->port.lock, flags);
+ uart_port_lock_irqsave(&uap->port, &flags);
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
@@ -1837,7 +1837,7 @@ static void pl011_unthrottle_rx(struct u
pl011_write(uap->im, uap, REG_IMSC);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
}
static int pl011_startup(struct uart_port *port)
@@ -1857,7 +1857,7 @@ static int pl011_startup(struct uart_por
pl011_write(uap->vendor->ifls, uap, REG_IFLS);
- spin_lock_irq(&uap->port.lock);
+ uart_port_lock_irq(&uap->port);
cr = pl011_read(uap, REG_CR);
cr &= UART011_CR_RTS | UART011_CR_DTR;
@@ -1868,7 +1868,7 @@ static int pl011_startup(struct uart_por
pl011_write(cr, uap, REG_CR);
- spin_unlock_irq(&uap->port.lock);
+ uart_port_unlock_irq(&uap->port);
/*
* initialise the old status of the modem signals
@@ -1929,12 +1929,12 @@ static void pl011_disable_uart(struct ua
unsigned int cr;
uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
- spin_lock_irq(&uap->port.lock);
+ uart_port_lock_irq(&uap->port);
cr = pl011_read(uap, REG_CR);
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
pl011_write(cr, uap, REG_CR);
- spin_unlock_irq(&uap->port.lock);
+ uart_port_unlock_irq(&uap->port);
/*
* disable break condition and fifos
@@ -1946,14 +1946,14 @@ static void pl011_disable_uart(struct ua
static void pl011_disable_interrupts(struct uart_amba_port *uap)
{
- spin_lock_irq(&uap->port.lock);
+ uart_port_lock_irq(&uap->port);
/* mask all interrupts and clear all pending ones */
uap->im = 0;
pl011_write(uap->im, uap, REG_IMSC);
pl011_write(0xffff, uap, REG_ICR);
- spin_unlock_irq(&uap->port.lock);
+ uart_port_unlock_irq(&uap->port);
}
static void pl011_shutdown(struct uart_port *port)
@@ -2098,7 +2098,7 @@ pl011_set_termios(struct uart_port *port
bits = tty_get_frame_size(termios->c_cflag);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
/*
* Update the per-port timeout.
@@ -2172,7 +2172,7 @@ pl011_set_termios(struct uart_port *port
old_cr |= UART011_CR_RXE;
pl011_write(old_cr, uap, REG_CR);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void
@@ -2190,10 +2190,10 @@ sbsa_uart_set_termios(struct uart_port *
termios->c_cflag &= ~(CMSPAR | CRTSCTS);
termios->c_cflag |= CS8 | CLOCAL;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
uart_update_timeout(port, CS8, uap->fixed_baud);
pl011_setup_status_masks(port, termios);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static const char *pl011_type(struct uart_port *port)
@@ -2332,9 +2332,9 @@ pl011_console_write(struct console *co,
if (uap->port.sysrq)
locked = 0;
else if (oops_in_progress)
- locked = spin_trylock(&uap->port.lock);
+ locked = uart_port_trylock(&uap->port);
else
- spin_lock(&uap->port.lock);
+ uart_port_lock(&uap->port);
/*
* First save the CR then disable the interrupts
@@ -2360,7 +2360,7 @@ pl011_console_write(struct console *co,
pl011_write(old_cr, uap, REG_CR);
if (locked)
- spin_unlock(&uap->port.lock);
+ uart_port_unlock(&uap->port);
local_irq_restore(flags);
clk_disable(uap->clk);
Reference in a new issue View git blame Copy permalink