116 lines
4.2 KiB
Diff
116 lines
4.2 KiB
Diff
From: Thomas Gleixner <tglx@linutronix.de>
|
|
Date: Thu, 14 Sep 2023 20:43:32 +0206
|
|
Subject: [PATCH 015/134] serial: altera_uart: Use port lock wrappers
|
|
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
|
|
|
|
When a serial port is used for kernel console output, then all
|
|
modifications to the UART registers which are done from other contexts,
|
|
e.g. getty, termios, are interference points for the kernel console.
|
|
|
|
So far this has been ignored and the printk output is based on the
|
|
principle of hope. The rework of the console infrastructure which aims to
|
|
support threaded and atomic consoles, requires to mark sections which
|
|
modify the UART registers as unsafe. This allows the atomic write function
|
|
to make informed decisions and eventually to restore operational state. It
|
|
also allows to prevent the regular UART code from modifying UART registers
|
|
while printk output is in progress.
|
|
|
|
All modifications of UART registers are guarded by the UART port lock,
|
|
which provides an obvious synchronization point with the console
|
|
infrastructure.
|
|
|
|
To avoid adding this functionality to all UART drivers, wrap the
|
|
spin_[un]lock*() invocations for uart_port::lock into helper functions
|
|
which just contain the spin_[un]lock*() invocations for now. In a
|
|
subsequent step these helpers will gain the console synchronization
|
|
mechanisms.
|
|
|
|
Converted with coccinelle. No functional change.
|
|
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: John Ogness <john.ogness@linutronix.de>
|
|
Link: https://lore.kernel.org/r/20230914183831.587273-16-john.ogness@linutronix.de
|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
---
|
|
drivers/tty/serial/altera_uart.c | 20 ++++++++++----------
|
|
1 file changed, 10 insertions(+), 10 deletions(-)
|
|
|
|
--- a/drivers/tty/serial/altera_uart.c
|
|
+++ b/drivers/tty/serial/altera_uart.c
|
|
@@ -164,13 +164,13 @@ static void altera_uart_break_ctl(struct
|
|
struct altera_uart *pp = container_of(port, struct altera_uart, port);
|
|
unsigned long flags;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
if (break_state == -1)
|
|
pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
|
|
else
|
|
pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
|
|
altera_uart_update_ctrl_reg(pp);
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
}
|
|
|
|
static void altera_uart_set_termios(struct uart_port *port,
|
|
@@ -187,10 +187,10 @@ static void altera_uart_set_termios(stru
|
|
tty_termios_copy_hw(termios, old);
|
|
tty_termios_encode_baud_rate(termios, baud, baud);
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
/*
|
|
* FIXME: port->read_status_mask and port->ignore_status_mask
|
|
@@ -264,12 +264,12 @@ static irqreturn_t altera_uart_interrupt
|
|
|
|
isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
|
|
altera_uart_rx_chars(port);
|
|
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
|
|
altera_uart_tx_chars(port);
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
return IRQ_RETVAL(isr);
|
|
}
|
|
@@ -313,13 +313,13 @@ static int altera_uart_startup(struct ua
|
|
}
|
|
}
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
/* Enable RX interrupts now */
|
|
pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
|
|
altera_uart_update_ctrl_reg(pp);
|
|
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
return 0;
|
|
}
|
|
@@ -329,13 +329,13 @@ static void altera_uart_shutdown(struct
|
|
struct altera_uart *pp = container_of(port, struct altera_uart, port);
|
|
unsigned long flags;
|
|
|
|
- spin_lock_irqsave(&port->lock, flags);
|
|
+ uart_port_lock_irqsave(port, &flags);
|
|
|
|
/* Disable all interrupts now */
|
|
pp->imr = 0;
|
|
altera_uart_update_ctrl_reg(pp);
|
|
|
|
- spin_unlock_irqrestore(&port->lock, flags);
|
|
+ uart_port_unlock_irqrestore(port, flags);
|
|
|
|
if (port->irq)
|
|
free_irq(port->irq, port);
|